4 System Settings

   4.1 Temperature
        4.1.1 Depress and hold the up or down arrow key of the temperature controller to scroll
        to the desired temperature. After 2 seconds the new value will be accepted and the
        temperature will ramp to the new set points.
4.2 Hot Air Flow
       4.2.1 Rotate the flow meter knob until the meter indicates the desired flow rate.

 

5 System Operation.

    5.1 Switch SYSTEM POWER on.
    5.2 Set heated air flow to 10 - 100 SCFM.
    5.3 Switch HEAT on.

        5.3.1 When the temperature is not within +/-3° of the set point the error
        message “TEMPERATURE ERROR” will be displayed.

    5.4 Position components to be processed within the thermal nozzle for a timed duration.
    5.5 Remove the components from the thermal nozzle and position them at the end of the
    cooling air nozzle. Depress the foot switch and toggle the panel switch “COOLING AIR”
    to start the flow of air.
    5.6 Allow heater head to cool to 245°F before shutdown.

 

6 System Specifications.
Description                     Range            Resolution          Accuracy
    6.1 Temperature       250-750°F             1.0°             +/-.25%F.S.
    6.2 Air Flow             5-100 SCFM        5.0 SCFM           +/-6% F.S.

 

8 Facilities Requirements.

    8.1 Voltage:                       108-132 VAC, 50/60 Hz.
    8.2 Wattage:                      500 W max.
    8.3 Compressed air:           80-100psi, 0.5 CFM, filtered, oil and water free.

​